 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| Phone (541) 915-2775 |
Convert your Portaband into a vertical band saw in seconds.
Installation is straight forward, remove the foot guard mounting screws and install the
¼” thick lightweight 6061 aluminum mounting plate. This mounting plate weighs less
than a pound and will reduce user fatigue when the Portaband is used as it was
originally intended for.
To convert your portaband into a vertical band saw, insert the saw into the table mounted
band saw bracket, and tighten the 5/16” thumb screw….simple as that. You now have a
saw that performs two functions, a portable band saw and a vertical band saw that does
not require any tools to switch between the two functions. The 12” wide ¼” thick table
mounted band saw bracket is laser cut and formed on a CNC press break, It has 4
holes on the bottom so it can be securely attached to your work bench.
This kit contains all the necessary hardware to attach a Dewalt or Milwaukee deep throat
portaband as well as all related fasteners to attach the steel bracket to your work bench.
Installation is straight forward, remove the foot guard mounting screws and install the
¼” thick lightweight 6061 aluminum mounting plate. This mounting plate weighs less
than a pound and will reduce user fatigue when the Portaband is used as it was
originally intended for.
To convert your portaband into a vertical band saw, insert the saw into the table mounted
band saw bracket, and tighten the 5/16” thumb screw….simple as that. You now have a
saw that performs two functions, a portable band saw and a vertical band saw that does
not require any tools to switch between the two functions. The 12” wide ¼” thick table
mounted band saw bracket is laser cut and formed on a CNC press break, It has 4
holes on the bottom so it can be securely attached to your work bench.
This kit contains all the necessary hardware to attach a Dewalt or Milwaukee deep throat
portaband as well as all related fasteners to attach the steel bracket to your work bench.
 | Fits Milwaukee deep throat model #'s 6230, 6236, 6238, 6232-6N | |
| Fits Dewalt deep throat model #'s DWM120, D28770K | |
|
120V 15 Amp Power Maintained Foot Switch |
| Easy to operate | |
| Includes 7 ft 5" power cord | |
| Maintained, two-step design -- press once to turn on, press again to turn off | |
A must-have for handsfree operation when using the Portaband vertical band saw mounting
plate. Effortless installation: plug the foot switch into a grounded outlet, then plug the machine
into the foot switch.
plate. Effortless installation: plug the foot switch into a grounded outlet, then plug the machine
into the foot switch.
| Milwaukee/Dewalt Portaband Modular Mounting System |
All Shipping is Based on Lower 48 States
Bolt On Miter Gauge Attachment |
All Shipping is Based on Lower 48 States
| Bolts on miter gauge attachment accepts industry standard 3/4' x 3/8' miter gauge slide | |
| Bolts on to either right or left hand side of existing holes in Portaband table . | |
| Helps keep your strait cuts strait and your miter cuts repeatable & consistent. | |
| An inexpensive miter gauge can be purchased HERE . | |