Swagoffroad.com Fold Down Tailgate Conversion Kits & Metal Fabrication Tools

Phone (541) 915-2775

troy@swagoffroad.com

This nuke proof design replaces the OEM rock catcher body mount.
The body mounts are angled on 4 side to slide up and over rocks.
Kit can be used with no body lift, up to a 2" body lift.
Laser cut from 1/4" & 3/16" thick steel and formed on a press break.
Kit consists of 6 replacement body mounts.
Welding and general fab skills are required for installation.

Click image above for additional info

Use in the shop, on the job site,or weld to a 2" receiver for maximum versatility.
No modifications necessary to adapt your Milwaukee or Dewalt Portaband.
Bolts on to existing foot guard mounting screws.
Compatible with optional bolt on miter gauge slide attachment.

Click image above for additional info

100% CNC machined for a precise fit.
Set Includes 1 Drive Roller, 2 Driven Rollers, 1 Replacement Drive Axle & 8 Set Screws.
Each drive roller has 8 set screws for increased durability not 3 like the HF rollers.
A new replacement drive axle is included and has 8 machined flats for the roller and 4 machined flats for the crank wheel.

Tool less removable aluminum center section for quick set up and removal from base plate.
Bolts on to existing foot guard mounting screws.
No modifications necessary to adapt your Milwaukee or Dewalt Portaband.
Compatible with optional bolt on miter gauge slide attachment.

Click image above for additional info

Constructed out of high strength A572, 3/16" steel, 1.75" .120" wall DOM tubing and dimple died holes, aid in strength and aesthetics.
Low profile bumper that fits both the Jeep YJ and Jeep TJ.
Bumper includes 1/4" thick fairlead mounting plate, two 1" thick tow points & tow point backing plates.
Excellent approach angle and super compact design will help keep you from getting hung up in the rocks.

Click image above for additional info

Products

Kit is 100% complete with hinges, cables, brackets, and fastener's.
Can be used with hard or soft top, Uses factory door latch and lock.
A Rattle free robust design that replicates the old school Jeep CJ's
The only kit on the market that converts your tailgate to a fold down design.

Click image above for additional info

Press Brake kit comes unassembled, you do the final assembly and welding.
Designed to fit the Harbor Freight 20 ton press.
Press Brake includes adjustable back stop and side top for accurate repeatable bends.
Max Bending Radius (deg.) 110
Max. Bending Capacity 3/8" plate
Max Bending Width 19.25"

Click image above for additional info

Designed to fit the 8 and or 24 gallon Rubbermaid Action Packer like a glove.
Constructed out of 1/8" aluminum, cut on a laser and formed on a press brake for a precise fit.
Engineered to withstand the abuse of off road racing, while weighing in at only 6.0 lbs.
Available in two configurations, hinged on one side or dual clasp design for tight clearances.
The top lid rail makes an ideal tie down point for securing loose cargo.
The Baja bin is well suited for your 4x4, UTV, desert race car, or securing an Action Packer to your trailer.

Sold in pairs of two.
Laser cut from 1.5" thick A-572-GR 50 steel.
The outside dimensions are 10" X 8.5" X 1.5', larger than most arbor plates.
These steel press plates are to replace the junk cast arbor plates that will shatter under heavy load
which is very dangerous. Cast arbor plates are typical provided with hydraulic presses.

Click image above for additional info

Kit includes (4) side plates & (4) side plate shims.
These plates reduce the total effort required in rolling tube ~50%.
If you have used this tubing roller previously then you can understand how the extended wings can be a real time saver
and greatly reduce user fatigue.

Clear up that clutter that is always floating on top of your work bench.
Laser cut from 1/8" thick steel and formed on a press brake.
Bolts to your work bench, tool cart or welding cart, increasing organization and freeing up additional workspace.

Click image above for additional info

You no longer have to splice tubing due to space limitations in your garage.
Bend a full length ~20 foot stick of tube in your standard 2 car garage.

Click image above for additional info

No drill installation, bolts up to existing holes on top of the grill.
Ideal for those with tight clearances or those who lack room to mount lights on the bumper.
Keep your lights out of harms way and clear of trail obstacles like branches, rocks, and trees.
No drill installation, bolts up to existing holes on top of the grill.

Click image above for additional info

Designed to fit the 16 quart Coleman cooler.
Constructed out of 1/8" aluminum, cut on a laser and formed on a press brake for a precise fit.
Keep your frosty pops cold and or keep items safely secured inside your vehicle while out on the trail.
This cooler fits perfectly behind the rear seat of a Jeep YJ or TJ.

Click image above for additional info

Bracket provides additional support to the rear bumper by bolting to the side to the frame rails and rear cross member.
Laser cut from 1/4" steel, and formed on a press brake for a precise fit.
Double bend construction to clear factory cross member welds and fully welded gusset for maximum rigidity.
All hardware included and instructions included.
Compatible with both stock and after market bumpers.

Click image above for additional info

Designed for the serious off roader in mind, yet civil enough to be compatible with your factory or aftermarket tailgate mounted tire carrier
Constructed out of high strength A572, 1/4" steel, 1.50" .120" wall DOM tubing and 1/8" top plates with dimple died holes.
Low profile bumper that fits both the Jeep YJ and Jeep TJ.
Excellent approach angle and super compact design will help keep you from getting hung up in the rocks.

Kit contains circle cutting plate and brass thumb screw.
Adjustable from 1.5" dia to 12.5" dia in 1/2" increments.
There are 4 laser etched markings on the circle cutting plate 0.50", 0.75", 1.00" and 1.25". Each large hole is 1.00" apart. The
laser etched markings are their stated value far away from the first large hole.
Example: You need to make a 6.0" dia or 3.0' radius hole you would thread in the brass thumb screw into the laser etched
1.00" hole and insert your plasma tip into the 3rd large hole, thus making a 6.0" dia circle.

Click image above for additional info

Designed to fit the Jeep TJ, however A, C pillar mounts as well as seat belt brackets are a universal design.
Laser cut from 3/16" high strength A-572-GR 50 steel, and formed on a press brake for a precise fit.
Sold in complete kit form or sold in individual components.
Both the A & C frame tie in's are isolated with polyurethane bushings to reduce vibrations and allow for body flex
Compatible with stock or aftermarket roll cages

Click image above for additional info

Allows you to easily notch from the back side of the tube and allows for a wider ranger of movement in every direction.
As an added benefit the Swag 360° reach around arm also helps you while notching on a bend.

Click image above for additional info

Hang your grinders up and safely out of the way,
Designed to fit grinders with or with out the factory safety guards installed.
Sold in two different configurations 5" and 9" widths.

Click image above for additional info

"BIG-HIT" TJ-YJ Rear Bumper

"BRUNO" TJ-YJ Super Stubby Front Bumper

Drop Down Tailgate Conversion Kits for Jeep TJ,s YJ,s & JK's

"DUCK TONGUE" TJ-YJ Grill Mounted Light Bar

"BERTHA" Wrangler High Clearance Body Mount Skid

TJ Rear Bumper/Frame Tie-In's

Universal Roll Cage Frame Tie-In's

Action Packer Baja Bin

Cooler Cage For 16 QT Coleman Cooler

20 Ton Press Brake DIY Builder Kit

Arbor Press Plates

SWAG Portaband Table V2.0

SWAG Portaband Table V1.0

Harbor Freight Tubing Roller Die Sets, Round & Square Dies

Harbor Freight Tubing Roller Weld On Wings

JD-2 Notchmaster 360° Reach Around Arm

Work Bench "Clutter Catcher"

Wall Mounted Grinder Attachment

(Infinite 8) Tube Bender Mounting Plate

Adjustable Plasma / Torch Circle Cutter

You are able to bend up to 70 degrees on the first stroke.
Sold in two configurations, welded or unwelded
This kit is designed out of pure necessity and built to be the best kit out on the market.

Click image above for additional info

Tubing Bender Air/Hydraulic Ram Mount

You no longer need to jam screw drivers in the port holes to remove your hole saws and or use thread reducers in your hole saws to get the correct
thread diameter. You will no longer be breaking screwdrivers , ob-longing your hole saws, and or breaking and welding the thread reducers on your
hole saws, do the math and save your self the aggravation.

Click image above for additional info

"Super Shaft" JD-2 Notchmaster & Pro Tools HSN Replacement Notcher Shaft

Click image above for additional info

SWAG Portaband Table V3.0

Tool less removable steel center section for quick set up and removal from base plate.
Bolts on to existing foot guard mounting screws.
No modifications necessary to adapt your Milwaukee or Dewalt Portaband.
Built in dual miter gauge slides.
Side plate can easily be unbolted for use in bench mounted vise if desired.

Swag Off Road T-Shirts.
Screen printed locally here in Oregon.
These shirts are made out of 100% cotton, and proudly display our company logo on the front & on the back.
The text on the back of the shirt reads " OFF ROAD PRODUCTS & INNOVATIVE FABRICATION TOOLS"

Click image above for additional info

Swag Off Road's Swag