Press Brake kit comes un-assembled, you do the final assembly and welding. Designed to fit the Harbor Freight 20 ton hydraulic press Item # 32879 & 60603. Press brake kit includes an adjustable back stop and side stop for accurate and repeatable bends.

The top clamping bar is machined out of 4140 material and includes 5 segmented removable sections. 1", 2", 3", 4" and 9.5" long pieces. These segmented blocks can be removed and rearranged to allow bending of restricted areas on a piece of sheet metal or on an already partially formed pieces.

Same quality construction and number of components as the standard press brake kit, just built out of high strength 3/8" steel and a wider bottom die 4.0" wide to allow for easier bending of thicker material.

• Max Bending Radius (deg.) 110
• Max. Bending Capacity 5/8" plate
• Max Bending Width 19.25"
• Total width of the brake is 22.125" wide

Tools required for assembly, welder, grinder, level, small square.

It Is capable of bending mild steel in the following length and thickness.

• 19" = Full bending width of the bottom die on anything 3/16" or thinner.
• 15" in 1/4"
• 13" in 5/16"
• 11" in 3/8"
• 6" in 1/2"
• 3" in 5/8"

The HD DIY 20 ton press makes a great addition to the arbor press plates we sell HERE.

PRESS BRAKE ASSEMBLY INSTRUCTIONS.pdf

We also offer top die assembly by it self and it is sold as a "Retro Fit Kit". This retro fit kit is compatible with all previous press brake kits ordered from us in the past, as long as the vertical guide pins are 7/8" in diameter. The retro fit kit will work with either the standard or HD press brake kits. Click on the 3rd picture above for product details.

Free shipping, how it this possible? We recently produced a new box that allows us to fit the 12 and 20 ton press brake kits into a large flat rate USPS shipping box.