Home > Metal Fabrication Tools > SWAG Tube Bending, Notching & Digital Read Out Displays SWAG Infinite (8) Tube Bender Mounting Plate

SWAG Infinite (8) Tube Bender Mounting Plate

28 Review(s)

Your Price: $28.95

Part Number:6I8A

This Item Ships Using (USPS), Please Provide A Suitable Shipping Address:

Infinite (8)

Quantity

Description
Videos

Customer Reviews

Infinite (8) Tube Bender Mounting Plate

A lot of us fabricators run into a common problem when bending a long piece of tube in a standard size garage, you often run into a fixed object, project vehicle, work bench or walls.

The laser cut 3/8" thick steel Infinite (8) tube bender mounting plate allows you to rotate your bender in 45 degree increments and swing the bender 360 degrees in any direction.

Installation is very easy as you simply weld one of the 3/4" nuts that came with your tube bender to the center hole in the mounting plate then weld the mounting plate to your vertical tube bender stand. You are now able to use one of the 8 holes on the outside of the mounting plate to clock your bender arms and thus rotate your material out of the way of any stationary object in your path.

The Infinite (8) tube bender mounting plate greatly reduces the amount of tubing splices you will have to make due to limited space in your shop/garage.

Works on JD2, JMR, Pro Tools, Woodward Fab WFB2, Eastwood 21115, as well as the new JD-32 tube benders.

When ordering please specify which model of tubing bender you have.

Please note: The Swag infinite 8 tube bender mounting plate is not compatible with the machined air/hydro ram mount.

SWAG INFINITE 8 INSTALLATION INSTRUCTIONS

View All Reviews

Great addition

Great for small shop space. Fit as intended. Shipped out quickly. I didn't think about it but make sure you set the orientation correctly if you want the bender mounted in a particular way.

Reviewed by: DYLAN Dickey from Colorado Springs. on 5/3/2020

Owner: Azfreeride & Freeride Fabrication

Quality of product was perfect, and really made the usability of our bender better.

Reviewed by: Jake from LAKE HAVASU CITY. on 10/22/2019

Infinite mounting plate

Perfect. Works as described. Easy to work with. Thanks

Reviewed by: Eddie from Somerton . on 7/24/2016

Technician

The infinite 8 mount works just like described with my protools 105hd bender. It has made it super easy to turn and maneuver the bender in the shop when a piece of material is running into a wall or toolbox or car.

Reviewed by: Andrew McReynolds from Joplin, Mo . on 5/26/2016

Very impressed with the quality of this item. My buddy owns a welding school here www.canadianweldingskills.ca and even he commented on the laser cut precision of the plate. I welded it to 2" square tubing and mounted JD Squared Model 3 bender. Plate really helps me because I have space constraints, bender rotates and locks in place perfectly. Thanks.

Reviewed by: Damian from Ontario Canada. on 5/2/2016

It works

I don't care how big you shop is, at some point your going to be in a long tube run and need more room. This is a simple solution that is well thought out and is made by people who actually use the products they sell. The simplicity of change proves the commitment to usefulness. Very good purchase and at a price point for people who actually built their own vehicles.

Reviewed by: James Peterson from TubeTJ.com. on 2/15/2016

Do it yourselfer

Using this multi position plate allowed me to raise the bender above the top plate of my home built stand, and at a height that is more manageable for me (I welded the nut at the center position then placed a round piece of tubing over the top and welded it to the plate, then welded other end to my top plate on my stand as a stand-off. this allows me to move the bender in a circle without removing the center bolt. However you plan to mount your bender, this plate just seemed like a no-brainer to me.....

Reviewed by: jack from oklahoma. on 1/15/2016

great for small shops!

I got one of these so I can use my JD2 model 32 in my tiny 12x12 shop. Works great and easy to install. I have also made adapters for several other tools to mount on it. Sure I could have made one but the time saved was worth it. Super fast shipping too. Thanks Troy!

Reviewed by: steve d from Wash., DC. on 11/24/2015