if (location.protocol != 'https:')
Tired of cranking the
handle on your tubing bender? Are you using a 6' cheater bar slid over the
factory handle to gain mechanical leverage, while trying to read the degree wheel that is ~ 8 feet away? This kit is designed out of pure
necessity and built to be the best kit out on the market.
fit either the JD-2 Model 3, JD-2 Model 32, Pro Tools 105, 105HD, Woodward Fab WFB2, Eastwood 21115
,and JMR manual tubing benders. The brackets are laser cut
out of high strength 1/4" steel and formed on a CNC press brake.
Sold in two configurations, welded or unwelded. Material thickness and bending capacity vary from tube bender to tube bender please consult your user manual for technical information. Rule of thumb if you can bend it manually then the SWAG air/hydraulic bender can bend the same material with ease.
Model 32 has 2 additional steel brackets and several additional fasteners not
show in the picture above, hence the additional cost. The formed version of the JD-2
Model 32 is rate up to .120 wall material. If you are bending thicker wall material, .188 or larger you will need our machined air/hydro ram mount.
Please note that this kit is 100%
complete, however it does not come painted. Tube bender as well as the 8 ton ram is not included. The 8 Ton Air/Hydraulic ram must have an outside diameter of 80mm. There are dozens of 8 ton rams that are sold on Ebay & Amazon, however a majority of them have an outside diameter of 84MM with will not work for this application. The 80mm OD ram we recommend can be
purchased directly form Harbor Freight PN 94562. If this unit is out of stock then we recommend the Valley 8 ton long ram that can be purchased off of EBAY HERE.
Tube Bender Optional accessory
Elastic Return Spring